NO HOT WATER? Follow These EASY Tips

Book An Estimate Now

Just how do you feel on the subject of Hot Water Heater Repair?


What Would Cause My Electric Water Heater to Stop Working?
Many modern residences take advantage of an electrical hot water heater for their furnace, as a result of its benefit and ease of use. Nonetheless, similar to any other electric home appliances, issues may arise with its usage, all of a sudden. It can be actually discouraging to get up to a cold shower instead of a warm one or having your bathroom with water that isn't warm sufficient or even also warm. Whatever the situation may be, water heater troubles can be fairly stressful. Thankfully, we've made a checklist of feasible services to your water heater concerns. There are a variety of elements that could trigger a lot of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for security. Whatever the problem is, getting it taken care of should not pose way too much of a problem if you follow these actions:

Call An Expert:


If after replacing all malfunctioning parts and also resetting your temperature level, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for a professional viewpoint. The problem with your heating unit could be that the cold and hot taps have actually been switched or it might be undersized for the amount of hot water required in your home. Whatever the situation might be, a professional plumber would certainly help fix the problem.

Examine Your Power Supply:


As basic as this might seem, it is extremely necessary. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the problem, simply turn it on and off again. Change any damaged or damaged fuse. Evaluate the device with power after these changes to see if it's currently functioning.

Check Your Thermostat:


If your hot water heater still isn't working or the water coming out isn't warm enough, you may require to check the temperature setups on your upper thermostat. Guarantee the breaker is switched off before doing anything. Open up the access panel as well as press the red switch for temperature level reset over the thermostat. This should assist warm the water. Turn the circuit breaker back on and also examine if the problem has actually been settled.

Check the Heating Element in the Hot Water Heater:


If it's not a power trouble, then try having a look at your heating element if it is still functioning. Check each of your burner to ensure the trouble isn't with any of them. If any of them is defective, replace that part and after that check whether the hot water is back on.

Final thought


Water heater issues are not constantly significant. Much of them result from small concerns like a blown fuse or damaged burner. Changing the damaged components need to suffice. Nevertheless, if you are still not able to fix the trouble, give a call to your local plumber ahead to get it fixed.


Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/



Hopefully you enjoyed our part on Hot Water Heater Repair. Thank you for taking time to browse our article post. Do you know about another individual who is fascinated with the subject? Be sure share it. Bless you for your time. Visit us again soon.




Here

Leave a Reply

Your email address will not be published. Required fields are marked *